Archived posting to the Leica Users Group, 2003/09/07
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]You don't have to trim the leaders for the M2. 1) may sure there is a film takeup spool 2) ask about when it was last serviced. The camera is likely 35 years old. 3) check the rangefinder alignment, at horizontal and at infinity. If it doesn't line up, count on spending money for a servicing. 4) check shutter speeds and sounds. Leica has a specific sound, and a transition at 1/30 as the slow speed escapement engages. There is the unique "double bounce sound" when the shutter completes its release 5) the film wind and shutter tensioning should feel smooth. If it feels like gear teeth engaging, it is time for a servicing. Same if you hear squeaks. 6) check the movement of the focus feeler arm. Is the action smooth and springy? 7) check the speed of the curtain travel on B. Does the curtain open at that same speed as it closes 8) do the different frame lines engage and is the action springy or stiff 9) check the back door and pressure plate. There shouldn't be any scratches on the pressure plate 10) check the shutter for holes and condition of curtains. They should look supple and complete, not dried out. 11) shoot a roll of film immediately using all speeds and check for evenness of exposure. Especially look out for a bright edge, indicating inadequate shutter brake, and need for servicing. Arrange a return/evaluation period to give you time for this. Are you buying from a store, or a private individual? If it is your first time, I might recommend buying from a reputable store first. Does the seller know what he/she is selling you? Will he take it back if you aren't happy? Factor in the cost of a servicing ($200~$300 plus time) if you intend to make this your primary camera. Many of the reputable Leica dealers also have used stock, so you can compare prices, and a store will offer followup support if the camera shows a fault. A private seller might not offer support after the sale. Good luck. Vick Justin Low wrote: >Hello all, > >If I am able to handle a M2 before deciding to buy it, what should I >look out for? > >I mean, like beyond the obvious no bullet holes or huge dents or cracked >glass, or more likely the smoothness of all the levers and buttons, what >else should one pay attention to? I would be a first time buyer, so any >advice would be most appreciated. > >I know that the M2 is an old camera, as many of you have pointed out in >response to one of my previous postings, but I think I have a really >good deal (of course, subject to the condition of the camera) here. > >One last question (which may sound silly), but does one have to trim >film leaders like for old screwmount Leicas to use it in the M2? > >Thanks in advance, > >Justin Low >justin@justinlow.com > > > - -- To unsubscribe, see http://mejac.palo-alto.ca.us/leica-users/unsub.html