Archived posting to the Leica Users Group, 2000/01/15
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]Tom. Your TTL could have a problem with the circuit for checking the chip in the camera. Unscrew your battery cover and take out the batteries. At the bottom of the 'well" you will see a spiral shaped silvery spring and also two small "silver" dots. Using a pencil, lightly slide the point over the two dots, if you can feel them protruding above the bottom of the battery well just push them down below the bottom level. Dont push too hard, just enough to get them below the level. The dots are parts of the 'check" circuit for the cameras metering system. If they protrude above the bottom they drain the batteries rather quickly. On my M6TTL I used to go through a set every 2-3 weeks and after the 'adjustment" they last for month. You can also stick a piece of thin, electricians tape over the two dots to ensure that they stay 'down" in high vibration environment ( choppers, airplanes, motorcycles etc). Tom A