Archived posting to the Leica Users Group, 1999/10/07
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]My 50 DR works great with my M6 in the regular range, although it won't mount if the focusing ring is near or at the 1 meter mark. When I attempt to mount the eyes, there is a black stopper on the eyes that must be there to protect the top plate when the eyes are mounted. It slips perfectly on the M4 & laps over the top plate on the lower half near the shutter speed dial, but my M6 top plate is just barely higher enough that it does not fit all the way, so the closer range does not unlock. The difference in height is soooo small, I'm sure there are probably some bodies it will work on & some that are not. I would think any TTL body would be too high to accept the eyes with the higher top plate. I know it is too high for the Visoflex. - -----Original Message----- From: Paul Schliesser [mailto:paul@pixelp.com] Sent: Thursday, October 07, 1999 4:26 AM To: Leica User's Group Subject: [Leica] Re: M6 and DR summicron Subject: Re: M6 and DR summicron Sent: 8/6/97 1:34 PM To: Leica User's Group, leica-users@mejac.palo-alto.ca.us >> Somebody wrote about DR Summicron 50 on an M6. Here is what I know >> about it. >> >> 1. You cannot switch to the near range on an M6. There is a sheet >> metal flange on the bottom on the M6, which prevents it from >> going to the near range. The M3 does not have the flange. > >Fortunately, nobody told my M6. It has been happily shooting amazing >closeups ever since I found a DR a year and a half ago. What a lens! The >results of closeup shots using Agfa 25 APX film enlarged to 11x14's (thru a >Focotar lens, of course) are beautiful. I've read that the DR Summicron is not supposed to work on the M6, but it works fine on mine. The eyes work with no problem. It has no problems on my M4-2. I know that Marc uses this lens on his M6, also. His is an older Wetzlar M6; mine is a fairly recent Solms M6. Gary's obviously works, also. So why does Leica say there is a problem? Are there slight differences in some DR mounts or something? The lens has two different focusing cams on the back, one for normal focusing and one for close range. If you look at the cam, half of it is much longer than the other half. The reason that you need to have it near infinity to remove it from the camera, is that the "step" between levels will catch on the focus lever if the lens is focused too close. - - Paul