Archived posting to the Leica Users Group, 1999/06/28

[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]

Subject: Re: [Leica] Loading the film
From: Henry Ambrose <digphoto@nashville.net>
Date: Mon, 28 Jun 1999 09:54:04 -0600

>I just bought a new M6 and the seller asked me to call when it arrived
>and he would walk me through the film loading. Now I thought that seemed
>pretty silly, but called anyway. Boy was I supprised. Since all this
>happened this week I thought I'd write it down before I forgot it. This
>is going to sound very elementary but I'm trying to paraphrase as
>closely as possible.
>
>0) empty the camera of the previous film if necessary
>1) check that the rewind lever is in the take-up (not rewind) position
>2) advance and release the shutter
>3) with the camera bottom up, remove the camera base plate and allow the
>door to open
>4) withdraw enough film from the cartridge to reach to the center of the
>three prong takeup spool
>5) insert the cartridge in the camera and work the film through to the
>center of the takeup spool
>6) with your left thumb work the film over the takeup sprocket (at this
>point due the the shape of the leader only the "bottom" sprocket will
>probably engage.
>7) still holding the film in place, take up any excess with the rewind
>crank (very lightly)
>8) now place the base plate on the camera (with the film-plane door
>still open)
>9) advance the film until the other sprocket engages and gently work the
>film between the guide rails - caution here as the shutter is just
>behind the film
>10) gently close the film-plate door until it lightly touches the
>baseplate. 
>11) raise the baseplate enough to capture the film-plate door
>12) lock down the baseplate
>13) advance the film and release the shutter (for two frames) - check
>that the rewind crank is turning with each film advance.
>14) enjoy .... just so we didn't have to end with 13.
>
>All of this is just to ensure that the take up sprockets are engaged,
>the film is correctly positioned between the rails and everything is
>tensioned properly so the film doesn't flex and disengage the takeup
>when you close the doors. Watching the rewind lever move on the initial
>advance is just old hat.
>
>Anyway, FWIW....
>
>Regards,
>
>Roger
>
>PS: I'm really looking forward to the new M6 Classic and 35mm Summicron
>ASPH. Now what to do with my M3.
>
>
Wow!

I'd get an APS camera if I had to do this to load whatever camera I was 
using currently. :)

Henry