Archived posting to the Leica Users Group, 1999/04/08
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]This is one of the most interesting threads on this list. But is the problem with the camera or the scanner? I would assume that *every* camera pressure plate or winding mechanism leaves its stamp on a roll of film, albeit microscopically, much like a rifle barrel carves its mark on a bullet or a typewriter key uniquely strikes a page. In fact, I would guess that the FBI Crime Lab could identify the camera a roll of film came from if they had to. But if nothing can see the scratches except a scanner, then maybe they're scanning in too much "noise." There should be a "Dolby" scratch filter for these things. LUGbutts, make sure you're sitting down for this: Our wives and girlfriends (and the male equivalents for the LUGladies) are literally *crawling*, yes *crawling*, with billions of tiny micro-organisms. Did you know that? Just think of that the next time romance strikes! (And I'm sure the sharpness gang is at work this very minute on the lenses of the future that will pick out each one of these critters ;-) ) I don't know about youse guys (South Philadelphia talk) but I'd just as soon filter that stuff out. Seriously, though, would those M6s had been considered defective prior to the advent of the computer scanner (which they seem to predate)? I doubt it. Should they be considered defective now...? Bruce Feldman Warsaw Original Message ----- From: Gareth Jolly <garethjolly@bigpond.com> To: <leica-users@mejac.palo-alto.ca.us> I posted a similar message to LUG a month or so ago and have been discussing >the matter with Gary Colby who has had a similar problem. > >My problem is precisely the same - no scratches on films from other cameras >with the film handled and processed under the same conditions; and scratches >showing up on a scan and if you angle the film to the light, but not on a >loupe. I've theorised that this might mean that the scratches are dug >directly down into the film - i.e perpendicular to the film base. >