Archived posting to the Leica Users Group, 1998/11/11
[Author Prev] [Author Next] [Thread Prev] [Thread Next] [Author Index] [Topic Index] [Home] [Search]nbwatson wrote "It should not affect the DR Summicron eyes, or the 2.8/135 eyes because the 2mm is added at the top of the viewfinder (vis. the silvered strip on top as well as bottom). The horizontal spacing between windows is evidently unchanged." Mr Watson I believe you have forgotten one feature of the DR Summicron or its mode of working. The eyes have a pin on them which goes over the top of the camera in the corner ahead of the shutter speed dial. This prevents the lens being removed in the close range position, presumably to prevent the cam ramp damaging the rangefinder roller pivot or something. In fact it was said when the M6 came out that the DR eyes would not fit due to the extra thickness caused by the change from a brass sheet pressing to a thicker wall mazak diecasting for the top plate. Mine does in fact just fit on my M6 but the clearance to the pin is less than on my M3. It will not be possible to use the eyes on a camera taller than standard M6, unless the pin is removed with the associated risks. Cheers Frank